DC 12V-24V Wall-mounted Touch Panel Switch Controller Full Color LED Dimmer for 5050 3528 RGB LED Strip Light

DC 12V-24V Wall-mounted Touch Panel Switch Controller Full Color LED Dimmer for 5050 3528 RGB LED Strip Light Model number : FC-BHMT-RGB Product Description : Touch panel controller is a new high-end controller which newly developed by our company. It adopts glass panel design, is beautiful and...

Product Details

DC 12V-24V Wall-mounted Touch Panel Switch Controller Full Color LED Dimmer for 5050 3528 RGB LED Strip Light

Model numberFC-BHMT-RGB

图片17.jpg

Product Description:

Touch panel controller is a new high-end controller which newly developed by our company. It adopts glass panel design, is beautiful and fashionable in appearance. It adopts high precision capacitance touch control chip, increases the touch sensitivity, reduces trigger which caused by mistake. It is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, wall washer lamp, panel lights etc., it has many advantages such as convenient to connect, easy to use and others. According to the actual need of customers,it can carry out jumpy changing,gradual changing, strobo flash and other effects of change.


Technical Parameters:

● working temperature: -20-60 ℃

● supply voltage: DC12-24V

● output: 3 channels

● connection mode: common anode

● external dimension: L86 Χ W86 Χ H36 mm

● packing size: L115Χ W110 Χ H56 mm

● net weight: 128g

● gross weight: 187g

● static power consumption: <1W

● output current: <4A( each channel )

● output power: 12V<144W,24V<288W


External dimension:

图片18.jpg

Connection description:


图片19.jpg

Direction for use:

1.Touch panel there are 4 buttons and a pulley key, the functions are as follows:

FC-BHMT-RGB1444.png:Touch this key to turn ON/OFF the controller on any state;

FC-BHMT-RGB1505.png:Mode key,can choose different kinds of the changing model(total 17 kinds of changing  models)by touch this key,press for long time 2-3S can turn on/off the buzzer;

FC-BHMT-RGB1671.png:Touch this key can increasing the output single brightness or speed,touch each time , the brightness or speed will increase 1 level(total 10level);

FC-BHMT-RGB1821.png:Touch this key can reducing the output signal brightness or speed.touch each time will reduce 1 level;

:Multicolor pulley touch key, static color mode selection key, up to 128 touch points



This button have two functions::

FC-BHMT-RGB2014.jpg① Pulley static color selection key,so when the current control mode is M keys mode(color),press this key to realize static color model.

② Pulley color switch key, can change from 128 kinds of colors(as the color ring shown)

2、When buzzer open, each time touch the touch panel, the buzzer will rang.


2、standard change is shown in the below table:

Mode No.

Function

Remarks

1

Static red

Brightness is adjustable, speed is unadjustable.

2

Static blue

3

Static green

4

Static cyan

5

Static purple

6

Static yellow

7

Static white

8

Three-color gradual changing

Speed is adjustable, brightness is unadjustable

9

Seven-color gradual changing

Speed is adjustable, brightness is unadjustable

10

Three-color jumpy changing

Speed is adjustable, brightness is unadjustable

11

Seven-color gradual changing

Speed is adjustable, brightness is unadjustable

12

Red color strobe  changing

Speed is adjustable, brightness is unadjustable

13

Green color strobe changing

Speed is adjustable, brightness is unadjustable

14

Blue color strobe changing

Speed is adjustable, brightness is unadjustable

15

Red and green color strobe

Speed is adjustable, brightness is unadjustable

16

Red and Blue color strobe

Speed is adjustable, brightness is unadjustable

17

Seven colors strobe and jumpy

Speed is adjustable, brightness is unadjustable


Typical Applications:


图片20(001).jpg


Installation Method:

(1) gently pry gaps in touch panel with a screwdriver, and then you can slowly remove the panel, as shown below;

图片21.jpg图片22.jpg

(2) remove the cable. Pull the locking of the terminal transposon, and then you can slowly remove the cable, as shown below:

图片23.jpg图片24.jpg

图片25.jpg图片26(001).jpg


(3) Fix the base of controller in the 86×86 installation box (customers need to buy the installation box by themselves) on the wall with screws.

图片27.jpg

(4) use your hand gently push up the cable seat lock according to step 2, plug the cable into cable seat, press the lock, and mount the cable of panel on the base, as shown below:

图片28.jpg

(5) installation is completed, as shown below:

图片29.jpg

FC-BHMT-RGB4211.jpg Cautions:

1、This products Input voltage is DC12-24V,other input voltage are not allowed,Please ensure short circuit can not occur between connecting wire before you turn on the power。

2、Lead wire should be connected correctly,according to the wire color and the connecting diagram offers.

3、Overload are prohibited.

Inquiry

Related Products