Wireless RF 4 Key RGB LED Controller DC12-24V

Wireless RF 4 Key RGB LED Controller DC12-24V Model No:FC-L1B-R4Q Products Description: 4-key RF controller adopts the advanced micro control unit, it is used for controlling a variety of constant voltage LED lights. For instance, led source , flexible led strip, wall washer, glass curtain wall...

Product Details

Wireless RF 4 Key RGB LED Controller DC12-24V

Model No:FC-L1B-R4Q

图片36.jpg

Products Description:

4-key RF controller adopts the advanced micro control unit, it is used for controlling a variety of constant voltage LED lights. For instance, led source , flexible led strip, wall washer, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through wireless remote control. And according to the actual need of customers, it can carry out jumpy changing, gradual changing, strobe, flash and other effects of change.


Technical specification:
● Model:Wireless RF 4 keys led controller

● Working temperature:-20-60℃
● Input Voltage:DC12V,24V Optional (please specify the ordered voltage)
● function model:11models.
● output:3circuits
● connecting model:common anode or cathode (optional)

● RF Frequency:433Mhz
● External Dimension:L103ΧW65ΧH30mm
● Net Weight:190g
● Output current:<4A/ch

● Output power:12V<144W/,24V<288W


External Dimension:                

Controller Size:

图片37.jpg

Remote Controller Size:

图片38.jpg

Connecting Drawing:

图片39.jpg

Direction for using

● Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

● Adopt wireless control method, 4 keys in total, function of each button as below::


Key name

Key Function

FC-L1B-R4Q1512.png

program

To press this key ,you can choose different color changes, each press one time,change a light .

FC-L1B-R4Q1624.png

Speed up

FC-L1B-R4Q1635.png:to speed up lighting color changing, with continuous reception.

FC-L1B-R4Q1702.png

Speed down

FC-L1B-R4Q1715.png:to speed down lighting color changing, with continuous reception.

FC-L1B-R4Q1784.png

On/off

The output switch,turn on or off the controller output at any state.


Standard color changes as follows:

Item

1

2

3

4

5

2(B) and 3(C) keys are used to adjust brightness

Color key

Static Red

Static green

Static yellow

Static blue

Static purple

6

7

8

9

10

Static cyan

Static white

3 color jump

7 color jump

3 color fade

7 color fade

Remark



2(B) and 3(C) keys are used to adjust changing speed


Common Problem and solution method:

Problem

Possible Cause

solution

Lamp does not light after power

ower cord is not properly connected, or there is not output switching power supply

Connect the power cord properly or replay the power

Color mismatching

RGB wire connected wrong

Check and Connect again

3. After connecting to power the controller is working properly,but remote control can not work

1. The blank on the button cell of remote controller did not pulled out 2. the remote controller do not target the receiver

1.Take away the transparent blank 2.Target the remote controller to the receiver

Inquiry

Related Products