Product Details
RF Touch panel RGB Controller With RF Receiver DC12-24V
Mode No:FC-T2H-QB0Q
Summarization:
Full color LED touch controller /RF wireless transmitter/ 3*4 channels output/PWM operating principle /Can be dimmed as many as 6.4 million with RGB. /16kinds of changing mode./ Dimming the color by touching the color ring./Easy use.
Technology parameter:
1. Technical Parameters (remote control):
1. Power supply: AAA battery * 3pcs
2. Cover material: ABS
3. Fabrication processing: multicolour printing & UV varnish
4.RF Frequency :433.92MHZ
2. Technical Parameters (controller):
1.Working temperature:-20℃-60℃
2. Working voltage: DC12V/24V
3. Output control: 3 circuits(R/G/B)
4. Control current: 6A/circuit
5. Connection method: common anode
6. RF Frequency :433.92MHZ
7. Receiving range: 20meters
8. Controller size:L130×W42×H31mm
9. Net weight:250g
10. Gross weight::449g.
11. Static power consumption:<1W
12. Output power:12V/6A < 216W;24V/6A< 432W;
Button function
A | ON/OFF | E | To next program |
B | Pause | F | Pairing key;B+/S+ |
C | Color ring for changing color or choose color | G | B-/S- |
D | Last program | - | - |
NO. | Changing color | Note | NO. | Changing color | Note |
1 | Auto changing | A.D.E.F.G. effected | 10 | RGB general changing | A.D.E.F.G. effected |
2 | Static red | A.D.E.F.G. effected | 11 | 7clor general changing | A.D.E.F.G. effected |
3 | Static Green | A.D.E.F.G.effected | 12 | 7clor general changing and jump changing | A.D.E.F.G. effected |
4 | Static Blu | A.D.E.F.G.effected | 13 | Red strobe-flash | A.D.E.F.G. effected |
5 | Static cyan | A.D.E.F.G effected | 14 | Green strobe-flash | A.D.E.F.G. effected |
6 | Static purple | A.D.E.F.G.effected | 15 | Blue strobe-flash | A.D.E.F.G. effected |
7 | Static yellow | A.D.E.F.G.effected | 16 | Red blue strobe-flash | A.D.E.F.G. effected |
8 | RGB jump changing | A.D.E.F.G.effected | |||
9 | 7color jump changing | A.D.E.F.G.effected |
Connecting way:
Warming:
*Do not touch the controller within 3s when battery are set.Please re-set the battery when you find a poor touch sensitivity.
*Paring code:First Press Key F, then turn on the controller to pair the control address.There will be 3times little flash of the LED lighting,when it is paired successfully.
*Cancel code : First Press Key F, then turn on the controller to pair the control address.There will be 6times little flash of the LED lighting,when the pairing code is canceled successfully.
Inquiry
Related Products
Shenzhen Feican Technology Co.,Limited
