RF Touch Panel RGB Controller DC12-24V

RF Touch panel RGB Controller DC12-24V Mode No:FC-T2H-R5Q Summarization: Full color LED touch controller /RF wireless transmitter/ 3*4 channels output/PWM operating principle /Can be dimmed as many as 6.4 million with RGB. /16kinds of changing mode./ Dimming the color by touching the color...

Product Details

RF Touch panel RGB Controller DC12-24V

Mode No:FC-T2H-R5Q

图片12.jpg                           

Summarization:

Full color LED touch controller /RF wireless transmitter/ 3*4 channels output/PWM operating principle /Can be dimmed as many as 6.4 million with RGB. /16kinds of changing mode./ Dimming the color by touching the color ring./Easy use.

 

Technology parameter:

1. Technical Parameters (remote control):

1. Power supply: AAA battery * 3pcs

2. Cover material: ABS

3. Fabrication processing: multicolour printing & UV varnish

4. RF Frequency :433.92MHZ


2. Technical Parameters (controller):

1.Working temperature:-20℃-60℃

2. Working voltage: DC12V/24V

3. Output control: 3 circuits(R/G/B)

4. Control current: 6A/circuit

5. Connection method: common anode

6.RF Frequency :433.92MHZ

7. Receiving range: 20meters

8.Controller size:L130×W42×H31mm

9.Net weight:250g

10. Gross weight::449g.

11.Static power consumption:<1W

12.Output power:12V/6A < 216W;24V/6A< 432W;


3. Functions of Keys

1. Key 1: on/off

2. Key 2: light changing mode (15 modes)

3. Key 3: color light/white light switching mode

4. Key 4: turn up (brightness/speed)

5. Key 5: turn down (brightness/speed)


4. How to use

1. Press Key 1 to turn on/off in any state.

2. Press Key 2 to activate light changing mode, keep pressing for different programs. There are 15 programs in total.

3. Press Key 3 once to activate white light mode, you can change brightness by pressing Key 4 or Key 5. Press Key 3 twice to activate color ring, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring.

4. Resume function. The previous settings will be resumed while power on again.

5. To match the remote control to the receiver (You do not need to do this when first out the box). Press Key 4 once when first switched on within 3 seconds. The light will blink 3 times to indicate that the remote control is matched.


Clearing Code

Press Key 4 five times when first switched on, again, the light will blink 6 times if clearing is successful.


Feature chart for Key 2

1

Auto color changing

8 grades of brightness to adjust by pressing Key 4 or Key 5

2

Three colors jumps to change

8 grades of speed to adjust by pressing Key 4 or Key 5

9

Green color jumps to change

8 grades of brightness to adjust by pressing Key 4 or Key 5

3

Seven colors jumps to change

10

Yellow color jumps to change

4

Three colors jumps to gradual change

11

Cyan color jumps to change

5

Seven colors jumps to gradual change

12

White color jumps to change

6

Red color jumps to change

8 grades of brightness to adjust by pressing Key 4 or Key 5

13

Red/Blue light twinkles alternately

8 grades of speed to adjust by pressing Key 4 or Key 5

7

Blue color jumps to change

14

Blue/Green light twinkles alternately

8

Purple color jumps to change

15

Green/Red light twinkles alternately


Connecting way:

图片13.jpg

Warming:

*Do not touch the controller within 3s when battery are set.Please re-set the battery when you find a poor touch sensitivity. 

*Paring code:First Press Key F, then turn on the controller to pair the control address.There will be 3times little flash of the LED lighting,when it is paired successfully. 

*Cancel code : First Press Key F, then turn on the controller to pair the control address.There will be 6times little flash of the LED lighting,when the pairing code is canceled  successfully.

Inquiry

Related Products