RF Touch 6 Key Wireless LED Remote Controller DC12-24V Model NO:FC-T1H-QH0Q
This FR touch remote control RGB controller adopted the advanced touch technology, Mainly used to control all kinds of constant volage led products, such as LED source, flexible strip, wall washer, glass curtain wall light and so on. User can choose different changing mode, adjust the speed and brightness,turn on/off by the remote control according to their preference .This controller is with power off memory function, next time to used it, will start with the model it save. Its built-in 7 kinds of static color, jump, fade, strobe,flow, automatic cycle and others effect. Agile wiring, easy connection and simple to used is the representative advantages of this controller.
Besides,This controller is with short circuit protection function,when meet short circuit, its green indicating light will be twinkling in a fixed frequency to indicate the user.what's more,Its with automatically restore function after short circuit protection,this personalized design can make the user experience another different sense.
① Novel,fashionable,unique,noble appearance ,High sensitivity with good feeling.
② The touching ring is sensitive, the RGB color wheel is Very intuitive appear in the touch ring,user can choose the color they prefer easily.Beside, this remote can be touch single point or to touch continually to realize choosing the color .
③ Low power consumption, long lifespan, can be touch infinite times , overcome the shortcomings of traditional key short lifespan.
④ With auto Resting function,it will be turn into Resting state after 20 seconds with touching the remote control,this function can Realize saving electricity and prolong the battery lifespan.
⑤ With auto Resting function,it will be turn into Resting state after 20 seconds with touching the remote control,this function can Realize saving electricity and prolong the battery lifespan.
⑥ Stable remote,long remote distance.
Supply Voltage:DC5V/DC 12V-24V,
Output:3 channels N-MOS Drain open output
Connection mode:common anode
Static power consumption:<0.5W
8A:5v:<120W 12V:<288W, 24:<576W
controller dimension::L84 Χ W82 Χ H33 mm
Power supply mode:2pcs NO.7 Battery
Static power consumption:<0.09mW
Stand-by time:6 months
Remote control Function instruction:
ON/OFF key Pause key
The Above one is mode + Button, at any state just touch this key to change for the former mode.
|The below one is mode - Button, at any state just touch this key to change for the latter mode.|
Touch the ring as shown,can choose static color by touching the color wheel. just touch ring,it will output the corresponding color at any time.
in Static mode, brightness +, increase output luminance;in Dynamic mode, speed +, to speed up the rate of change.
in static model,brightness-,Reduce output luminance；in Dynamic mode, speed -, slow down the rate of change.
changing models are as below:
To next program
Pairing key；B+/S+(match Key)
Color ring for changing color or choose color
RGB general changing
7clor general changing
7clor general changing and jump changing
Red blue strobe-flash
RGB jump changing
7color jump changing
DC+: For power input +（power supply voltage12v-24v）
DC-: For power input -
V+: For Load Common anode
R/CH1: Load output Red channel
G/CH2: Load output Green channel
B/CH3: Load output Blue channel
Power: Red indicating light is for power light，when the power on it will be turn on.
Receiver: Green indicating light, normally it will be in the state of OFF,it will be twinkle
when received Signal From the remote.When the controller output meets short circuit,the green indicating light will be twinkle in a Fixed frequency to indicate the user.
1. The use of power and load voltage, current, power must be consistent with the product.
3. This product warranty is 12 month，But not including the damage by people and other reason caused by over load working.