Wall Mounted IR 12Keys led dimmer
Item No: FC-PB-I12TD
12-key Infrared Dimmer Is a dedicated intelligent LED lighting dimmer controls, Adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, You can manually adjust the brightness step-less. IR wireless remote control can also be used to remote dimming; Standards for commercial or home a low 86-type switch socket box installation, LED Dimmer switches can be installed to meet the light needs of commercial or home lighting in the different time and different environments, To extend the LED life span, energy saving; power and low-power LED lighting can be dimming. Is used to control a variety of led lamps as the light source, For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; With competitive price, easy wiring, simple to use etc.; Through the infrared remote control and dimmers on the knob to adjust brightness; Gray level 255; with custom features, delay shutdown function and a fixed gray scale output.
● working temperature：-20-60℃
● Supply Voltage：DC5V、12V ~24V Optional.
● External dimension：L87xW87xH53mm
● Controller size：L86xW33xH7mm
● packing size：L160xW95xH51mm
● net weight:145g
● gross weight:180g
● static power consumption：<1W
● output current：<8A
● output voltage： 5V:<40W, 12V:<96W, 24V:<192W
Remote controller size:
Delay off key: press this key, it will close in 30s automatically.
Press this key is brightness-；press this key i brightness+
Brightness shortcut key: choose the correspond brightness through pressing the four keys.
DIY mode keys: there are 4 keys in total, press one key for 3S, then the indicator light flicker once, it shows the current brightness has been saved in this key, the four keys are the same function. Usually press once show the previous saved brightness.
Direction for using:
1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power；
2.There are disruptive obstacles;When the dimmer after receiving infrared remote control signal, the upper red light flashing luminous bar;Two kinds of patterns that move light dimmer adopted.
Common Problem and solution method:
Lamp does not light after power
ower cord is not properly connected, or there is not output switching power supply
Connect the power cord properly or replay the power
RGB wire connected wrong
Check and Connect again
3. After connecting to power the controller is working properly，but remote control can not work
1. The blank on the button cell of remote controller did not pulled out 2. the remote controller do not target the receiver
1.Take away the transparent blank 2.Target the remote controller to the receiver