RF Touch Remote Single Color Controller

RF Touch Remote Single Color Controller Model:FC-T1H-QDC Introduction: This Rf Touch Remote single Color dimmer is one of a newly design LED Touch remote controller of Our factory. Using the latest capacitance touch technology and unique appearance design,Looks Simple, intuitive ,it realize of...

Product Details

RF Touch Remote Single Color Controller  Model:FC-T1H-QDC

图片22.lnk.jpg

Introduction:

This Rf Touch Remote single Color dimmer is one of a newly design LED Touch remote controller of Our factory. Using the latest capacitance touch technology and unique appearance design,Looks Simple, intuitive ,it realize of the effect of remote dimming control.This controller provide one channel single color output. This controller is integrated with the advantage of easy connection, stable Rf transmission just with little Interference, and long lifespan.This controller is with short circuit protection function,when meet short circuit, its green indicating light will be twinkling in a fixed frequency to indicate the user. what's more, Its with automatically restore function after short circuit protection,this humanized design can make the user experience another different sense


Technical parameters:

Controller:

●Working temperature:-20℃~+60℃

●Supply Voltage:12V,24V available(Please specify the voltage when place order)

●Output:1 single color channels

●Connection mode:common anode

●controller dimension:L83×W79×H33 mm

●Net Weight:227g

●Gross Weight:250g

●Static power consumption:<1W

●Output current:<6A

●Output power:12V:<72W,24V:<144W


Romoter

●Working temperature:-30℃~+60℃

●Power supply mode:3pcs NO.7 Battery

●Supply voltage:3V

●Static power consumption:<0.09mW

●Remote-controlled distance:>20M


External dimension:

(Controller)

图片28(001).jpg


(Remoter)


图片29(001).jpg

Connection Instruction:

图片30(001).jpg

DC+: For power input +(power supply voltage DC12v-24v)

DC-: For power input -

V+: For Load Common anode

V-: Output cathode

Power: Red indicating light is for power light,when the power on it will be turn on.

Receiver: Green indicating light, normally it will be in the state of OFF,it will be twinkle

when received Signal From the remote.


main characteristic:

① Novel,fashionable,unique,noble appearance ,High sensitivity with good feeling.

② The touching ring is sensitive, the color brightness is Very intuitive appear in the touch ring, user can choose the color brightness they prefer easily. Beside, this remote can be touch single point or to touch continually to realize choosing the color temperature.

③ Low power consumption, long lifespan, can be touch infinite times , overcome the shortcomings of traditional key short lifespan.

④ With auto Resting function,it will be turn into Resting state after 20 seconds with touching the remote control,this function can Realize saving electricity and prolong the battery lifespan.

⑤ Stable remote,long remote distance.


Remoter Function instruction

图片31(001).jpg

Button

Function

FC-T1H-DC2662.png

The left one is OFF button,the right one is ON button, At any time just need to gently touch this two buttons,than can make it open or closed.

FC-T1H-DC2808.png

The above key are 100% brightness hotkey, touch it gently, the brightness will reach at 100% brightness output.

The above key are 2% brightness hotkey, touch it gently, the brightness will reach at 2% brightness output.

FC-T1H-DC3050.png

Touching ring is as the chart on right shows,,Touch the are outside of this circle is the dead space,without button function;To slide the touching ring by clockwise ,the  light will be become darker; To slide the touching ring by Counterclockwise the Cold light become brighter

FC-T1H-DC3332.png

Brightness+  key,Increase output luminance.

FC-T1H-DC3379.png

Brightness- key,Reduce output luminance.


*Paring code:First Press Key F, then turn on the controller to pair the control address.There will be 3times little flash of the LED lighting,when it is paired successfully.

*Cancel code : First Press Key F, then turn on the controller to pair the control address.There will be 6times little flash of the LED lighting,when the pairing code is canceled  successfully.

图片32(001).jpg

Typical Applications:

图片33(001).jpg

图片34.jpg Caution

1、Supply voltage of this product is DC12V~24V, never connect to others or AC220V.

2、Lead wire should be connected correctly according to grade that connecting diagram offers.;

3、This product can not be overloaded。

Inquiry

Related Products