RF Single Color Touch dimmer controller
Five key touch controller is wireless small volume controller which newly introduced by our company, touch remote control adopts high precision capacitance touch control technology, you can select the color temperature proportion and brightness you need by one button. It is convenient and easy. It is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass wall light etc. It has many advantages such as convenient to connect, easy to use and others.
connection mode:common anode
static power consumption:<1W
Touch Remote Control
power supply mode:AAA*3
transmission frequency:433.92 Mhz
standby power consumption:0.015mW
remote distance:about 30m
standby time:6 months
remote control weight:85g
External Dimension (mm)
Button indicator descriptions
1. Power: power indicator, it lights when connected with external power supply;
2. Signal: RF signal indicator, it flashes when receiving correct remote control signal;
3. Match: match code and clear code key, clear code: hold the key power on, clear code all the same type of remote control can be remote control. Match code: Press the key during work process, it executes match code operation , after matching code, only the remote control with the same address code can be used for controlling;
4. Function: on/off and mode key, long press the button, you can turn on/off the output of controller, short press the button, you can switch the mode;
The positive power supply
The negative power supply
Direction for use
1. Direction for use of remote control:
(1) on/off key: you can turn on/off controller output at any state;
(2) brightness hotkey, brightness 25%
(3) brightness hotkey, brightness 75%
(4) brightness hotkey, brightness 100%
(5) brightness hotkey, brightness 50%
(6) touch ring, sliding along the A→B→C direction, brightness increases gradually; on the contrary, brightness reduces gradually;
Power supply management: stop to use the remote more than 15-20s, the remote control will enter the standby state, to extend the battery life. Color ring can not be used at this time, slightly shake once, then the remote will come back to the normal working state.
2. Modes corresponding to Function button are shown as the following table:
Brightness is adjustable
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Power supply voltage range is DC12~24V, more than voltage range maybe burn out the controller.
3. When not use touch remote control for long time, we suggest you to take down the batteries.