PIR Motion Sensor Power Switch

PIR Motion Sensor Power Switch

PIR Motion Sensor Power Switch MODEL: FC-PB-PIR Summarization The human induction power switch is an infrared detection controller, adopt infrared detection mode to control the load of the switch. According to actual needs of user, installed the human induction power switch in an appropriate...

Product Details

                           

PIR Motion Sensor Power Switch

MODEL: FC-PB-PIR

图片74.jpg

Summarization

The human induction power switch is an infrared detection controller, adopt infrared detection mode to control the load of the switch. According to actual needs of user,  installed the human induction power switch in an appropriate environment

 

Technical parameters

Working temperature: -20-60 ℃ 

Supply voltage: DC5V, 12-24V can optional (supply voltage should be marked on order)

Output:: 1 channels

Sensing distance: 5 ~ 8 M.

Ham should angle: 120 degrees.

External dimension: L89ΧW59ΧH35 mm

Packing size: L96ΧW65ΧH60mm

Net weight: 65g 

Gross weight: 83g

static power consumption: <1W

Output current: <8A

output power: 5v<40W , 12v<96W , 24v<192W

 

External Dimension

图片75.jpg  

Interface Specifications

Input interface

图片76.jpg

Used with the screws on the plug

Load output interface:

图片77.jpg

Used with the screws on the plug


Direction for Use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2. when the detected light up when the load was light, when people leave after 10 seconds, load lights automatically turn off.

3. The controller signal output line and input line should be connected correctly.


Typical Application

图片78(001).jpg

Previous: 0-10V Dimmer

Next: 12V RGB Dimmer

Inquiry

Related Products