IR 24 Key Single Color dimmer
This 24 key infrared dimmer (upgrade) multifunctional LED dimmer adopts advanced microcomputer control,who is used to control all kinds of LED as light source of lamps and lanterns; simple wiring and convenient use;Through the infrared remote control to control the LED function change, Courier, brightness control.
● working time：-20-60℃
● Power Supply： DC5V、12V、24V optional (please specify the required voltage on order）
● Output ：Single circuit
● Connecting model.common anode
● Net Weight：50g
● Static power consumption:<1W
● Output current：6A
● Output power：5V<30W，12V<72W，24V<144W
Direction for using：
1. Connect the Load wire firstly,following by the power wire, Please ensure short circuit can not occur between connecting wire before you turn on the power；
2. 2.Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controller and receiver.
The Key-Press function as the flowing:
|IR24Key Function||Function Specification|
Static model brightness level
Static model brightness level keys.The larger the number, the higher the brightness level.
+：Brightness increase,press each time the bright will add 1,
-:brightness decrease,press each time,the brightness will be decreased.
Color jump changing
Press this key to realize jump changing.
Jump changing speed key
Press this key to realize jump changing,The larger the “Hz”number, the fast speed jump changing level.
Press this key to realize strop changing
Press this key to realize fade model
Fade model changing speed key.
Press this key to realize fade model，20s,15s,10s, 5s is the fade changing speed time.“S” is“second”。
For example:press key, fade model will be changed from the brightness to darkness within 20 seconds.. Press .key, fade model will be changed from the brightness to darkness within 15seconds.
Common Problem and solution method:
1. Lamp does not light after power
Power cord is not properly connected, or there is not output switching power supply
Connect the power cord properly or replay the power
Lamp power cord is not connected or short circuit
Connected lighting power cord
2. After connecting some of the load the controller does not work
The connected load is too large，so that it has burned in some of the components of the controller
Replace parts of components or replace the controller
3. After connecting to power the controller is working properly，but remote control can not work
1. The blank on the button cell of remote controller did not pulled out 2. the remote controller do not target the receiver
1.Take away the transparent blank 2.Target the remote controller to the receiver